15
SureCycler 8800
Setup and User’s Guide
Agilent Technologies
2
Installation
Installation 16
Step 1. Select a location for the instrument 16
Step 2. Unpack the cycler 16
Step 3. Install the thermal block on the instrument base 16
Step 4. Connect the instrument to a power supply 17
Step 5. Connect optional d
ev
ices 17
Step 6. Turn on the instrument 17
Step 7. Connect the cycler to a network (optional) 17
Thermal Block Exchange 18
To remove the thermal block 18
To install the thermal block 18
This chapter contains installation instr
uctions
for setting up the cycler
instrument.
To Next Page
Loading...
