Agilent Technologies 8860 User Manual

Installation 3
Procedure
Agilent Gas Sample Selector for 8860 and 8890 Safety and Installation Manual 39
6 Using a wrench, tighten the connection with a 1/4 turn.
7 Connect the purge gas to the Purge Gas fitting on the back of the Selector. Set
the source supply to a pressure suitable to surge the Selector (no higher than
2,500 kPa, or 363 psi).

Agilent Technologies 8860 Specifications

General

Brand	Agilent Technologies
Model	8860
Category	Laboratory Equipment
Language	English