Agilent Technologies 8860 User Manual

Installation 3
Procedure
Agilent Gas Sample Selector for 8860 and 8890 Safety and Installation Manual 41
CAUTION
Do not use liquid leak detection fluid on the vent line or allow liquid to enter the
vent line. Liquid and condensation in the vent line can cause backpressure and
can be pulled into the Selector and damage the instrument.
10 Connect the USB cable from the Selector USB COM connector to the GC. Use
either USB connector on the GC.
11 Connect the Selector power adapter to the Power connector on the back of the
Selector, and then to the power outlet.

Agilent Technologies 8860 Specifications

General

Brand	Agilent Technologies
Model	8860
Category	Laboratory Equipment
Language	English