Agilent Technologies B1500A User Manual

1-4 Agilent B1500 VXIplug&play Driver User’s Guide, Edition 3
Installation
Installing VXIplug&play Driver
The installation flow is shown below. If you have already installed the GPIB (IEEE
488) interface, VISA I/O library, and programming software on your computer, skip
steps 1 through 4.
1. Install the GPIB interface to your PC.
See manual of the GPIB interface. Note the model number of the GPIB
interface, as you may need it to configure the interface (in step 3).
2. Install VISA I/O library.
Follow the setup program instructions.
3. Configure and check the GPIB interface.
See manual of the VISA I/O library.
4. Install the programming software.
Follow the setup program instructions.
5. Install the Agilent B1500 VXIplug&play driver.
a. Insert the Agilent B1500 Software CD-ROM to the drive connected to your
computer.
b. Execute setup.exe or \Pnp\B1500.exe on the CD-ROM.
The setup program installs the driver. See Table 1-1 for the installed files.

Agilent Technologies B1500A Specifications

General

Brand	Agilent Technologies
Model	B1500A
Category	Measuring Instruments
Language	English