Agilent B1500 VXIplug&play Driver User’s Guide, Edition 3 2-39
Driver Functions
agb1500_readStatusByte_Q
15: Sampling index
16: Invalid data
-1: No channel related data
value Measurement data or source setup data. Returned data.
status Status. Returned data. See “Status Code” on page 2-14. To
disable the status data output, set 0 (NULL pointer) instead.
channel Slot number of the slot that installs the SMU/MFCMU used for
measurement/output. Returned data.
If value is regardless of channel settings, -1 is returned.
agb1500_readStatusByte_Q
This function returns the contents of the status byte register.
Syntax ViStatus _VI_FUNC agb1500_readStatusByte_Q(ViSession vi,
ViPInt16 statusByte);
Parameters vi Instrument handle returned from agb1500_init( ).
statusByte The contents of the status byte are returned in this parameter.
Returned data.
agb1500_recoverOutput
This function returns the unit to the settings that are stored by the
agb1500_zeroOutput function, and clears the stored unit settings.
Syntax ViStatus _VI_FUNC agb1500_recoverOutput(ViSession vi, ViInt32 channel);
Parameters vi Instrument handle returned from agb1500_init( ).
channel Slot number of the slot that installs the SMU/MFCMU to return
the channel settings. See Table 2-2.
channel=0 specifies all modules.
channel=-1 detects the CMU slot automatically.
To Next Page
Loading...
Need help?
General
