Agilent Technologies E5061B - Page 46

Chapter 2 45
Troubleshooting
Performance Test failure Troubleshooting
2. Troubleshooting
assembly and others are tight or loose. Also check for possible disconnection (impairment)
of the cables and connectors.
Table 2-8 Performance Test failure Troubleshooting information (Option 3L5)
Test Num.
First failed test Probable faulty board assembly or
parts
A1/A11
Source
Module
A2
Receiver
Module
A9 LF
Source
Bias
Module
1 Frequency accuracy test ### # #
2 RF output level accuracy and
flatness test
### # #
3 RF output level linearity test ### # #
4 Trace noise test ## ### #
5 Crosstalk & system Dynamic
Range test
## ### #
6 Dynamic accuracy test # ### #
7 Uncorrected system performance
test
## ### #
8 LF output level accuracy& flatness
test (Opt 3L5)
## ###
9 LF output level linearity test (Opt
3L5)
## ###
10 DC bias accuracy test (Opt 3L5) # ###
11 Crosstalk & noise level test (Opt
3L5)
# ### #
12 Input impedance test (Opt 3L5) ###
13 Absolute amplitude accuracy test
(Opt 3L5)
# ### #
14 Magnitude ratio/phase dynamic
accuracy test (Opt 3L5)
# ### #
15 Magnitude ratio/phase frequency
response test (Opt 3L5)
# ### #
16 Trace noise test (Opt 3L5) ## ### #
17 DC measurement accuracy test
(Opt 3L5)
### ###