2-36 Chapter2
Getting Started
File Menu Functions
Copy a File
1. To access the Copy menu, press File, Copy. This menu function
brings up 2 directory boxes as described by the From: and To: fields
located directly above the boxes. Refer to Figure 2-14.
Figure 2-14 Copy Menu
2. Put a formatted floppy in the A: drive.
3. Select the type of file you want to copy (setup, state, trace, limits,
screens, or corrections). In this example you are copying a trace file
from the C: drive to the A: drive; press,
Type, Trace.
4. Press
Dir (in the key menu) to underline From:. Notice the From:
field (just above the top directory box) highlights the location from
which you will be copying. Using the navigation keys (
Dir Up, Direct
select, step keys, or front panel knob), locate the C:\START\
directory.
5. Scroll to highlight the file displayed in the directory box from which
you wish to copy. In this example, you will need to highlight the file
RENAME.
6. Press
Dir (in the key menu) to underline To:. The To: field (just
above the bottom directory box) is highlighting the location to which
you will be copying. Using the navigation keys as described above,
highlight the A:\ drive.
NOTE When pressing Dir (To), the file chosen in the From: location is no longer
highlighted, however the Name: field above the From directory box
displays the chosen file; in this example: RENAME.TRC.
To Next Page
Loading...
Need help?
General
