Agilent Technologies N8700 - Page 113

Verification and Calibration Appendix B
Series N8700 User’s Guide 113
Test Record – Agilent N8739A [100V, 33A, 3.3kW]
Agilent N8739A
Description
Report No _______________ Date __________________
Minimum Specs. Results Maximum Specs.
Voltage Programming & Readback
Minimum Voltage Vout
Measurement Readback
High Voltage Vout
Measurement Readback
0 mV
Vout − 100 mV
99.9 V
Vout − 200 mV
_____________
_____________
_____________
_____________
+ 250 mV
Vout + 100 mV
100.1 V
Vout + 200 mV
CV Load Effect − 20 mV _____________ + 20 mV
CV Source Effect − 12 mV _____________ + 12 mV
CV Ripple and Noise
peak-to-peak
rms
N/A
N/A
_____________
_____________
100 mV
25 mV
Transient Response
Voltage @ 1 ms − 500 mV _____________ + 500 mV
Current Programming & Readback
Minimum Current Iout
Measurement Readback
High Current Iout
Measurement Readback
0 mA
Iout − 99 mA
32.901 A
Iout − 132 mA
_____________
_____________
_____________
_____________
+198 mA
Iout + 99 mA
33.099 A
Iout + 132 mA
CC Load Effect − 11.6 mA _____________ + 11.6 mA
CC Source Effect − 5.3 mA _____________ + 5.3 mA
WARNING
Return the voltage and current settings to zero when verification is completed
Test Description N8739A Settings
Voltage Programming & Readback, Min Voltage ≤200 mV, 132 mA
Voltage Programming & Readback, High Voltage 100V, 132 mA
CV Load Effect, Source Effect, Ripple and Noise 100V, 33A
Transient Response 100V, from 3.3A to 29.7A
Current Programming & Readback, Min Current 132 mA, 100V
Current Programming & Readback, High Current 33A, 100V
CC Load Effect, Source Effect 33A, 100V
N8739A Load Requirements
Current shunt 0.01
W
100 A
Agilent N3300 Electronic load modules 7 – N3305A
Fixed Resistor for CV Ripple and Noise 3.0
W
3.5 kW