Agilent Technologies N8700 User Manual

4 Series N8700 User’s Guide
In this Book
This User’s Manual contains the operating instructions, installation
instructions, and specifications of the Agilent Technologies Series
N8700 3.3kW and 5kW System DC Power Supplies. Specific chapters
in this manual contain the following information:
 Quick Reference – Chapter 1 is a quick reference section that
helps you quickly become familiar with your Agilent N8700
power supply.
 Installation – Chapter 2 describes how to install your power
supply. It describes how to connect various loads to the output. It
discusses remote sensing as well as parallel and series operation.
 Operating the Power Supply Locally – Chapter 3 describes how to
operate the power supply from the front panel and from the
analog connector on the rear panel. It also includes a turn-on
check-out procedure to verify the unit is operating properly.
 Operating the Power Supply Remotely – Chapter 4 describes how
to configure the remote interfaces. It also gives a brief overview
of the SCPI command structure and basic programming concepts.
 Language Reference – Chapter 5 describes all of the SCPI
programming commands.
 Programming Examples – Chapter 6 provides Visual BASIC
example programs that illustrate some common applications.
 Specifications – Appendix A describes specifications and
supplemental characteristics.
 Verification and Calibration Procedures – Appendix B explains
the verification and calibration procedures.
 Service – Appendix C describes what to do if your unit requires
service.
 Compatibility – Appendix D documents the compatibility
commands of the Agilent 603xA power supplies that are
supported by the Agilent N8700 power supplies.
NOTE
You can contact Agilent Technologies at one of the following telephone
numbers for warranty, service, or technical support information.
In the United States: (800) 829-4444
In Europe: 31 20 547 2111
In Japan: 0120-421-345
Or use our Web link for information on contacting Agilent in your country or
specific location:
www.agilent.com/find/assist
Or contact your Agilent Technologies Representative.
The web contains the most up to date version of the manual. Go to
http://www.agilent.com/find/N8700 to get the latest version of the manual.

Agilent Technologies N8700 Specifications

General

Brand	Agilent Technologies
Model	N8700
Category	Power Supply
Language	English