4 Installation Note E4440-90613
Switchable Microwave Preselector Bypass Installation Kit
NOTE
1. The installation of this kit requires that some re-adjustment and performance testing
be performed in order to assure the new option is functioning properly. This installation
note includes a list of required adjustments and performance tests. Completing the list
of required performance tests does not guarantee the instrument meets all
specifications.
2. The instrument end user must determine whether they need a full instrument
calibration following the installation of the kit. If full calibration is required,
arrangements regarding the level of calibration must be made between the end user and
the calibration provider.
3. This option is licensed for one instrument model number/serial number combination.
The license key will only install on the designated instrument.
To Next Page
Loading...
Need help?
General
