Instructions for Use 16
Turbo-V 81-M User Manual / 87-900-983-01 (E) 191/228
Maintenance
The Turbo-V 81-M series pumps does not require any maintenance.
Any work performed on the system must be carried out by
authorized personnel.
WARNING!
Before carrying out any work on the system, disconnect it from the mains,
vent the pump by opening the appropriate valve, wait until the rotor has
stopped turning and wait until the surface temperature of the pump falls
below 50 °C.
In the case of breakdown, contact your local Agilent service center
who can supply a reconditioned system to replace that broken down.
NOTE
Before returning the pump to the constructor for repairs, or advanced exchange
service, the "Health and Safety" sheet attached to this instruction manual must
be filled-in and sent to the local sales office. A copy of the sheet must be inserted
in the system package before shipping.
If a system is to be scrapped, it must be disposed of in accordance
with the specific national standards.
To Next Page
Loading...
Need help?
General
