Getting Started 1
U2000 Series Operating and Service Guide 11
Initial Inspection
Inspect the shipping container for damages. If the shipping container or
packaging material is damaged, it should be kept until the contents of the
shipment have been checked mechanically and electrically. If there is any
mechanical damage, notify the nearest Agilent Technologies office. Keep
the damaged shipping materials (if any) for inspection by the carrier and
a Agilent Technologies representative. If required, you can find a list of
Agilent Technologies Sales and Service offices on the last page of the
guide.
Package Contents Checklist
Inspect and verify the following items for the standard purchase of the
U2000 Series USB power sensors. If there are missing items, contact the
nearest Agilent Sales Office.
• Trigger cable BNC Male to SMB female 50 Ω, 1.5 m
• Power sensor cable, 1.5 m
• Certificate of Calibration
• U2000 Series USB Power Sensor Documentation CD
• N1918A Power Analysis Manager Assembly
• Agilent Automation- Ready CD (contains Agilent IO Libraries Suite)
To Next Page
Loading...
Need help?
General
