1Getting Started
12 U2000 Series Operating and Service Guide
Hardware Installation and Configuration
System Requirements
Prior to using the U2000 Series USB power sensors, please ensure that the
following minimum requirements are met:
• PC or any device that has USB host capability
• Agilent IO Libraries Suite 15.5 or higher had been installed. Users are
encouraged to obtain the latest version of Agilent Libraries Suite for
better performance.
• Optional: Agilent N1918A Power Analysis Manager had been installed
(Basic Power Panel is bundled with the purchase of the U2000 Series
USB power sensors, while users can also obtain the advanced Power
Analyzer which is an optional licensed software with additional features
and capabilities)
1
.
• The U2000 Series can also be programmed using remote programming
software such as Agilent VEE, LabVIEW, and Microsoft Visual Basics
1 Refer to the N1918A Power Analysis Manager Data Sheet, 5989-6612EN for more information on
the features of the Power Panel and Power Analyzer.
To Next Page
Loading...
Need help?
General
