EasyManua.ls Logo

Agria 5000 - Engine Starting and Stopping Procedures

Agria 5000
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Edition 02.97 Grassland Mower Hopper 5000 23
4. Commissioning and Operation
Compact version:
(for cold start only)
Comfort version:
(for cold start only)
Starting the Engine
Engine cold:
Compact version.
Engine type CLASSIC 35
l
Press PRIMER (B/10) 3 times to in-
ject fuel
l
Move speed control lever (A/3) to
”max” (FULL THROTTLE).
Comfort version:
Engine type Quantum XM 45
l
Move speed control lever to ”CHOKE”
position
Engine warm:
l
Move speed control lever (A/3) to
operating position midway between
idling speed and full speed
l
The operator is behind the handle-
bar
l
Keep off harzardous area (in particu-
lar children)
l
Leave both clutch control levers (A/1
and A/2) in off-position
l
Pull the starter cord handle (A/4) until
you feel the starter clutch engage. Then
pull hard and fast to start the engine.
After the start, let the cord glide back.
Do not let it snap back.
l
Once the engine is started move the
speed control lever slowly midway be-
tween idling speed and full speed and
let it warm up for a short time.

Related product manuals