83
Configuring the Station
2.8 NTP
2.8.1 Enable NTP
2.8.2 Synchronization Interval [hour]♦
2.8.3 Primary Server
2.8.3.1 Address
■ IPv4
■ IPv6
Description Configure whether to obtain the time from an NTP server.
Settings • Yes
• No Use
Default values No Use
Description Configure the interval for synchronizing the clock with the NTP server.
Settings 1-255 hours (by one hour)
Default values 24hour
Description Configure the IPv4 address of the primary NTP server.
When using a Hostname, set up
“DNS (→page 68)”.
Settings 1.0.0.1-223.255.255.254 or hostname(1-64 alphanumeric characters)
Default values —
Description Configure the IPv6 address of the primary NTP server.
When using a Hostname, set up
“DNS (→page 68)”.
Settings ::FF:0 - FEFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF or hostname (1 - 64 alphanumeric
characters)
Default values —