103
Configuring the Station
5.2 Relay Output
Click [Relay Output].
Or, click "Relay Output" in the Setting menu to switch to the Relay Output window.
Important
• The four relay output methods are shown below. Redundant configuration is possible for each relay output. If multiple
commands occur during a single relay output, the latest command will take priority.
– Function selected in
“Function (→page 104)”
–
“Option Relay Control (→page 105)”
–
“Schedule Settings (→page 106)”
–
“CGI (→page 120)”
To Next Page
Loading...
Need help?
General
