Aiphone IXG System - How to Configure the Status Output

106
Settings and Adjustments
Configuring on the station
4
How to configure the Status Output
Refer to “Configuring settings (→page 74)” for information on how to display the setting screens.
1. On the Relay Output Settings screen, tap [Relay Output 1] or [Relay Output 2].
2. Tap [Status Output] on the Relay Output Settings (Advanced) screen.
• The Status Output screen will be shown.
3. Select the operation to perform relay output. (multiple selections allowed)
4. Tap [SELECT].
• The settings will be saved.