62
How to use
Operations while placing a call, in communication,
paging and monitoring
3
Placing a call on hold
When on a call, the call can be put on hold temporarily.
The on-hold tone will play on the other station while it is on hold.
1. Tap during a call.
• The call will be placed on hold and the transfer
destination search screen is displayed.
2. To resume the call, tap [HOLD
CANCEL].
• Resume communication.
Note
• When hang up the handset while the call is on hold, the call
will be terminated.
• It is possible to transfer a call while it is on hold.
(→page 55)
• The video from the station is not sent to the other station
while that station is on hold.
To Next Page
Loading...
