24
Before Using
Setting the date and time
2
Setting the date and time
The date and time are used for video/audio recording and the incoming/outgoing call history. Be sure to set them
correctly. When the station is synchronized with a NTP server, date and time will be automatically configured.
Default value: 2020/01/01 09:00
1.
Tap [Settings] on the Home
screen.
2. Tap [User].
3. Tap [Station].
4. Tap [Date and Time].
5. Set [DATE] and [TIME].
• Set the time zone before configuring the date
and time.
6. Tap [BACK].
• The configured date and time will be applied to
this station.
To Next Page
Loading...
