Aiphone IXG System - Operations While Placing a Call, in Communication, Paging and Monitoring; Unlocking a Door

60
How to use
Operations while placing a call, in communication,
paging and monitoring
3
Unlocking a door
In the following case, the electric lock can be released.
• Incoming call (only while the video is displayed)
• Communicating
• Monitoring
Releasing with the door release button
1. Tap .
• The door unlocks.
• When the door is released, switches to
for 3 seconds.
• The status indicator of the master station will
flash blue when the door is released.
Releasing with the keypad
Depending on the configuration, the button may
not be displayed.
1. Tap .
2. Use the keypad to enter
"**authentication key*."
• If the authentication key is "0000" enter
"**0000*."
• Tap to delete the previous character.
Note
• If the door cannot be released, an error tone will sound.
• Depending on the configuration, tapping the door release
button a second time while the door is already released will
extend the door release timer.
• Depending on the setting, if the electrical lock is released
during incoming calls from the Entrance Station or while
communicating, the incoming call or communication will
end automatically after approximately 10 seconds.