61
How to use
Operations while placing a call, in communication,
paging and monitoring
3
3. Tap [ENTER].
• The door unlocks.
• When the door is released, switches to
for 3 seconds.
• The status indicator of the master station will
flash blue when the door is released.
Note
• Depending on the configuration of the station receiving the
door release command, a notification tone may be heard
when the authentication key is confirmed.
• If the door cannot be released, an error tone will sound.
• Ask the administrator for the authentication key.
• Depending on the configuration, tapping the door release
button a second time while the door is already released will
extend the door release timer.
• Depending on the setting, if the electrical lock is released
during incoming calls from the Entrance Station or while
communicating, the incoming call or communication will
end automatically after approximately 10 seconds.
To Next Page
Loading...
