31
How to use
Specifying a station
3
Searching for stations
Enter characters to search and specify units, stations, or messages.
<Example: Making an outgoing call>
1. Tap .
2. Enter the name or number of the
unit or station to search.
• Refer to (→page 20) for information on how to
enter characters.
3. Tap the unit or station to call.
Note
• To call a specified unit or station.
–
“Calling the other party (→page 34)”
–
“Sending a page (→page 38)”
–
“Sending a message page (→page 40)”
• To monitor the specified station, refer to
–
“Monitoring a door station (→page 46)”
• To transfer a call to the specified station, refer to
–
“Transfer calls (during communication) (→page 55)”
To Next Page
Loading...
