35
How to use
Placing / Answering a Call
3
5. To end the communication, hang
up the handset or tap .
Note
• It may not be possible to place a call. It depends on the
configuration of the station.
• The ringback tone may not be played, depending on the
settings.
• If the communication time set in advance is exceeded on
your station, communication automatically ends. A
notification tone sounds approximately 10 seconds before
ending. The notification tone may not sound depending on
the configuration.
• If a page with a higher priority is received from another
station while making an outgoing call or during
communication, the outgoing call or call will be interrupted
and the station will switch to the page.
• Topping during communication turns off the
microphones of the handset and the station as well as
camera video. Tap to turn them back on.
• When receiving another call while talking, a notification
tone will be heard from the handset or built-in speaker. Tap
to choose the station to communicate with.
(→page 63)
To Next Page
Loading...
