- 35 -
SETTINGS
Viewing station information
View a notifi cation for updating the fi rmware of the station. If an
update is available, continue to update the station. It is also
possible to confi gure the settings to automatically update the
station.
Viewing a notifi cation for updating the
station
1 From the MENU screen, tap
→
>
→
Other Settings
.
A message will appear asking whether or not to proceed.
2 To continue, tap
.
3 Tap
Station Information
→
Check for FW Update
.
Register / Delete apps microSDHC card
Video Quality Station Information
Network Default User Settings
OTHER SETTINGS 1/2
When updating is available
A message will appear and to ask whether to update the
station.
• To update, tap
after reading the message carefully.
* When the updating has been completed, the station
will reboot after 5 seconds, and then returns to the
MENU screen.
* If the update has failed, an icon will appear along
with the cause of the failure will be shown.
• To cancel update, tap .
When the fi rmware is up to date
A message will appear to show the fi rmware is up to date.
Tap
to return to
Station Information
.
Confi guring the settings for automatically
updating the station
* To enable the automatic update, the station must be
connected to the network.
The station and the server will communicate periodically for
updating.
Settings Update Automatically/Notify Only/No Check
Default Notify Only
1 From the MENU screen, tap
→
>
→
Other Settings
.
A message will appear asking whether or not to proceed.
2 To continue, tap
.
3 Tap
Station Information
→
Automatic FW update
.
Register / Delete apps microSDHC card
Video Quality Station Information
Network Default User Settings
OTHER SETTINGS 1/2
4 Tap one of the selections below.
UpdateAutomatically NotifyOnly
Update Automatically
:
Select this to enable the automatic update.
* The update will happen without prior notice. While
updating, all the functions of the station will not be
properly function, including receiving an incoming call.
Notify Only
:
Select this to be notifi ed only about the latest fi rmware and
update at a desired time.
The notifi cation can be confi rmed by tapping
on the
MENU screen. (
→
P. 39)
No Check
:
Select this if you do not want both automatic update and
notifi cation when the station is connected to the network.
(
→
P. 39)
Select this if you do not connect the station to the network.
5 T
ap
to apply settings.
1
1
2
2