To connect the hub to the GSM network, you need a micro-SIM card with a disabled PIN code request (you can
disable it using the mobile phone) and a sufficient amount on the account to pay for the GPRS, SMS services and
calls.
In some regions, Hub is sold with a SIM card along
If the hub does not connect to Ajax Cloud via GSM, use Ethernet to set up the network parameters in the app. For
the proper setting of the access point, username, and password, please contact the support service of the operator.
Ajax Account
The user with administrator rights can configure the Ajax security system via the app. The administrator account with
the information about the added hubs is encrypted and placed on Ajax Cloud.
All the parameters of the Ajax security system and connected devices set by the user are stored locally on the hub.
These parameters are inextricably linked with the hub: changing the hub administrator does not affect the settings of
the connected devices.
One phone number may be used to create only one Ajax account.
Create the Ajax account in the app following the step-by-step guide. As part of the process, you need to confirm your
email and phone number.
To Next Page
Loading...
Need help?
General
