AJAX Hub User Manual

• Upper motion detector test
• Lower motion detector test
• Masking sensor test
Attenuation test
Switches the detector to the signal fade test mode (available in
detectors with firmware version 3.50 and later)
User Guide
Opens the detector User Guide
Unpair Device
Disconnects the detector from the hub and deletes its settings
Indication
MotionProtect Outdoor light indicator may light up red or green depending on the device status.
Indication When Pressing the “On” button
Event
Indication
Pressing the power button (detector is switched on)
Lights up red while the button is held down

AJAX Hub Specifications

General

Brand	AJAX
Model	Hub
Category	Switch
Language	English