Functionality testing
The Ajax security system allows conducting tests for checking the functionality of connected devices.
The tests do not start straight away but within a period of 36 seconds when using the standard settings. The test time
start depends on the settings of the detector scanning period (the paragraph on “Jeweller” settings in hub settings).
Signal Strength Test
Installation of the Device
WallSwitch should be only installed by a qualified electrician! Regardless of the type of the electrical circuit in which the device is installed
WallSwitch is designed for installation inside a socket box with the diameter 50 mm and more and the depth no less
than 70 mm. The relay can also be installed within extension cords and other circuits powered by 230 V.
Communication range with the hub absent any obstacles between the devices – up to 1,000 meters. Take account of
this when choosing the location for WallSwitch.
If the device has a low or unstable signal strength, use a radio signal range extender ReX.
To Next Page
Loading...
Need help?
General
