AJAX KeyPad TouchScreen Manual

Setting the keypad response to device alarms
KeyPad TouchScreen can react to the alarms of each detector in the system
with a built-in buzzer. The function is useful if you do not need to activate the
buzzer in case of the alarm of a specic device, for example, to
leakage detector triggering.
By default, the keypad response is enabled for alarms of all devices in the system.
To set the keypad response to a device alarm:
Setting the keypad response to tamper alarm
KeyPad TouchScreen can react to the enclosure alarms of each system device
with a built-in buzzer. When the function is activated, the keypad built-in buzzer
will emit a sound signal when triggering the of the device.
To set the keypad response to a tamper alarm:
LeaksProtect
1. Open the .Ajax app
2. Go to the Devices tab.
3. Select the device for which you want to congure the keypad response from
the list.
4. Go to the device Settings by clicking on the icon.
5. Find the Alert with a siren option and select the toggles which will activate
it. Enable or disable the function.
6. Repeat steps 3-5 for the rest of the system devices.
tamper button
1. Open the Ajax app.
2. Go to the Devices tab.
3. Select the hub and go to its Settings .

AJAX KeyPad TouchScreen Specifications

General

Brand	AJAX
Model	KeyPad TouchScreen
Category	Keypad
Language	English