How to set Chime
If Chime on opening is enabled, KeyPad TouchScreen notify you with a short
beep if the opening detectors are triggered when the system is disarmed. The
feature is used, for example, in stores, to notify employees that someone has
entered the building.
Notications are congured in two stages: setting up keypad and setting up
opening detectors. provides more information about Chime and how
to set up detectors.
To set the keypad response:
If the settings are made correctly, a bell icon appears in the Control tab of the
Ajax app. Click it to activate or deactivate chime on opening.
To set the chime control from the keypad display:
If the settings are made correctly, a appears in the Control tab on the
keypad display. Click it to activate/deactivate chime on opening.
This article
1. Open the Ajax app.
2. Go to the Devices tab.
3. Select KeyPad TouchScreen and go to its Settings .
4. Go to the Sound Indication menu → Beep Settings.
5. Enable the Chime on opening toggle in the Beep when disarmed category.
6. Set the required notications volume.
7. Click Back to save the settings.
1. Open the Ajax app.
2. Go to the Devices tab.
3. Select KeyPad TouchScreen and go to its Settings .
4. Enable the Chime managing with keypad toggle.
bell icon
To Next Page
Loading...
Need help?
General
