The PR7 model is equipped with 6-speed transmission. On the left side of the engine is located
the gearshift pedal (1). To shift gear properly:
― Actuate the clutch lever and close the throttle simultaneously to operate the gearshift
pedal;
― Press down the gearshift pedal to engage a lower gear on the sequence.
Move upwards the gearshift pedal to engage a higher gear on the sequence;
― Slowly release the clutch lever to a smooth transition.
The gearshift lever will return to original position automatically when operated.
Neutral position is located between first and second gear. To engage neutral gear, shift to first
gear, with clutch lever gripped, slowly up-shift gearshift pedal until neutral indicator light up in
the instrument panel.
The rear brake pedal is placed on the engine right side. Pressing down the rear brake pedal (2)
will actuate the rear brake. At the same time, the stop light in the taillight will switch on.
A “spongy” front brake lever or rear brake pedal are indicators of a problem in the
braking system. Do not ride the motorcycle until the braking system be checked by
an AJP dealer.
To Next Page
Loading...
