Akuvox C313 Series Admin Guide

C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
78
14.5.Power Output Setting
You can enable power output function for PON interface on device web
interface Device Setting > Basic > Power Output Setting.
Note:
When the Power Output function is set to enabled, and the PON
interface is connected with some particular exchangers, it may
cause the device reboots repeatedly.

Akuvox C313 Series Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ethernet	10/100Mbps
Relay Output	1
PoE	IEEE 802.3af
Power Supply	DC 12V or PoE