Akuvox C313 Series Admin Guide

C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
92
19.3.Autop Schedule
Akuvox provides you with different Autop methods that enable the indoor
monitor to perform provisioning for itself in a specific time according to your
schedule. To set up the schedule on device web Upgrade > Advanced >
Automatic Autop interface.
Please see the picture below:
Parameter Set-up:
 Power On: select “Power on”, if you want the device to perform Autop
every time it boots up.
 Repeatedly: select “Repeatedly”, if you want the device to perform autop
according to the schedule you set up.
 Power On + Repeatedly: select “Power On + Repeatedly” if you want to
combine Power On Mode and Repeatedly mode that will enable the
device to perform Autop every time it boots up or according to the
schedule you set up.
 Hourly Repeat: select “Hourly Repeat” if you want the device to perform
Autop every hour.

Akuvox C313 Series Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ethernet	10/100Mbps
Relay Output	1
PoE	IEEE 802.3af
Power Supply	DC 12V or PoE