Akuvox C313 Series Admin Guide

C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
70
14.2.7. Alarm Action Configuration
The triggering of the alarm sensor can be accompanied by the actions you
configured in forms of HTTP command, SIP Message, Call, Local Relay for
different security purposes.
14.2.7.1. Select Alarm Action Types
To select and set up actions on web Arming > Alarm Action interface.
Parameter Set-up:
 HTTP Command: enable HTTP command if you want the action to be
implemented on a designated third party device

Akuvox C313 Series Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ethernet	10/100Mbps
Relay Output	1
PoE	IEEE 802.3af
Power Supply	DC 12V or PoE