Akuvox C313 Series Admin Guide

C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
66
14.2.2. Configure Alarm and Arming on the Web
Interface
To set up a location-based alarm sensor on the device web interface
Arming> Zone Setting > Zone Setting.
Parameter Set-up:
 Location: set up the location according to where the alarm sensor is
stalled. You can select among ten location types: “Bedroom”, “Gate”,
“Door” “Guest room” ,“ Hall” ,“Window”, “ Balcony” ,“Kitchen”, “ Study” and
"Bathroom”.

Akuvox C313 Series Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ethernet	10/100Mbps
Relay Output	1
PoE	IEEE 802.3af
Power Supply	DC 12V or PoE