Akuvox C313 Series Admin Guide

C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
86
16.1.2. Configure Lift Control Prompt
When the lift controller receives the HTTP command, it will feedback the
current lift status with a prompt. To do this configuration on web Phone >
Lift> Hints interface. Edit the HTTP Status Code, feedback code from Lift
control board.
If there are huge amounts of prompts need to be add, you can click Export
tab to export a template, after editing to import/export.
16.2.Smart Living Setting
You can control the home sensor through HTTP command on device web
interface Phone > Smart Living.

Akuvox C313 Series Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ethernet	10/100Mbps
Relay Output	1
PoE	IEEE 802.3af
Power Supply	DC 12V or PoE