Akuvox C313W Admin Guide

C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
35
To check and configure network connection on the device web Network >
Basic interface.
Parameter Set-up:
 DHCP: select the DHCP mode by checking the DHCP box. DHCP mode is
the default network connection. If the DHCP mode is selected, then the
indoor monitor will be assigned by the DHCP server with IP address,
subnet mask, default gateway, and DNS servers address automatically.
 Static IP: select the Static IP mode by checking off the DHCP square box.
When static IP mode is selected, then the IP address, subnet mask,
default gateway, and DNS servers address have to be manually
configured according to your actual network environment.
 IP Address: set up the IP address if the static IP mode is selected.
 Subnet Mask: set up the subnet mask according to your actual network
environment.
 Default Gateway: set up the gateway on default gateway according to the
IP address of the default gateway.
 LAN DNS1/2 Server: set up DNS (Domain Name Server) according to your
actual network environment. Preferred DNS Server is the primary DNS
server address while the Alternate DNS Server is the secondary server
address and the door phone connects to the alternate DNS server when
the preferred DNS server is unavailable.

Akuvox C313W Specifications

General

Brand	Akuvox
Model	C313W
Category	Intercom System
Language	English