Akuvox C313W Admin Guide

C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
36
10.2.Device Deployment in Network
Akuvox C313 series indoor monitors should be deployed before they can be
properly configured in the network environment in terms of their location,
operation mode, address and extension numbers as opposed to other
devices for device control and the convenience of the management. To
deploy the device in the network on web Network > Advanced > Connect
Setting interface.
Parameter Set-up:
 Connect Type: It is automatically set up according to the actual device
connection with a specific server in the network such as SDMC or Cloud
and None. None is the default factory setting indicating the device is not
in any server type, therefore you are allowed to choose Cloud, SDMC in
discovery mode.
 Discovery Mode: to turn on the discovery mode of the device so that it
can be discovered by other devices in the network, and disable if you
want to conceal the device so as not to be discovered by other devices.
 Device Address: specify the device address by entering device location
info from the left to the right: Community, Unit, Stair, Floor, Room in
sequence.
 Device extension: enter the device extension number for the device you
installed.
 Device Location: enter the location in which the device is installed and
used.

Akuvox C313W Specifications

General

Brand	Akuvox
Model	C313W
Category	Intercom System
Language	English