C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
10.3. Device NAT Setting
NAT (Network Address Translation) allows hosts in an organization’s private
intranet to transparently connect to hosts in the public domain.
There is no need for internal hosts to have registered Internet addresses. It is
a way to translate the internal private network IP address into a legal network
IP address technology. To set up NAT, you can do it on web Account >
Advanced > NAT interface.
Parameter Set-up:
RPort: check the RPort when the SIP server is in WAN (Wide Area
Network).
10.4.Device Wi-Fi Setting
In addition to wired connection, the device also supports Wi-Fi connection.
You can set the Wi-Fi on device screen More > Setting > Advance > Network.
To Next Page
Loading...
Need help?
General
