Akuvox C313W Admin Guide

C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
45
Parameter Set-up:
 Starting RTP Port: enter the Port value in order to establish the start point
for the exclusive data transmission range.
 Max RTP port: enter the Port value in order to establish the end point for
the exclusive data transmission range.
11.8.Data Transmission Type Configuration
SIP message can be transmitted in three data transmission protocols: UDP
(User Datagram Protocol), TCP (Transmission Control Protocol), TLS
(Transport Layer Security) and DNS-SRV. In the meantime, you can also
identify the server from which the data come from. To do this configuration
on web Account > Basic > Transport Type interface.
Parameter Set-up:
 UDP: select “UDP” for unreliable but very efficient transport layer
protocol. UDP is the default transport protocol.
 TCP: select “TCP” for Reliable but less-efficient transport layer protocol.
 TLS: select “TLS” for Secured and Reliable transport layer protocol.
 DNS-SRV: select “DNS-SRV” to obtain DNS record for specifying the
location of services. And SRV not only records the server address but

Akuvox C313W Specifications

General

Brand	Akuvox
Model	C313W
Category	Intercom System
Language	English