C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
14.2.5. Configure Alarm Text
After the alarm sensor is set up, you are allowed to customize your alarm text
shown on the screen when an alarm is triggered on web Arming> Zone
Setting > Customized Alarm interface. Enter the alarm text for the alarm at
each location according to your need.
14.2.6. Configure Arming mode
To switch arming mode, disarm the alarm on Arming screen by pressing their
respective icons. Press Disarm icon if you want to clear the Arming Mode.
To Next Page
Loading...
Need help?
General
