Manual Autop
Autop is a centralized and unified upgrade of telephone. It is a
simple and time-saving configuration for phone. It is mainly used by
the device to download corresponding configuration document from
the server using TFTP / FTP / HTTP / HTTPS network protocol. To
achieve the purpose of updating the device configuration, making
the user to change the phone configuration more easily. This is a
typical C/S architecture upgrade mode, mainly by the terminal
device or PBX server to initiate an upgrade request.
URL: Auto provisioning server address.
User Name: Configure if server needs an username to access,
otherwise left blank.
Password: Configure if server needs a password to access,
otherwise left blank.
Common AES Key: Used for phone to decipher common auto
provisioning configuration file.
Figure 4.4.2-2 Manual auto provision
To Next Page
Loading...
Need help?
General
