Akuvox R29 Series Admin Guide

26
3.6.2.3. SIP Server
In the phone interface, go to Account - Account setting -
Account 1&2 to configure the SIP server. Users can also go to the
path Account - Basic - SIP Server 1&2 to configure.
Server IP: To enter SIP server’s IP address or URL.
Server Port: To enter the SIP server port.
Registration Period: The registration will expire after registration
period, the IP phone will re-register automatically within registration
period.
3.6.2.4. Outbound Proxy Server
Login to the website and go to the path Account - Basic -
Outbound Proxy Server to display and configure outbound proxy
server settings. An outbound proxy server is used to receive all
initiating request messages and route them to the designated SIP
server.
Figure 3.6.2.3-2 SIP server
Figure 3.6.2.4 Outbound proxy server
Figure 3.6.2.3-1 SIP server

Akuvox R29 Series Specifications

General

Power	PoE or 12V DC
Operating System	Android
RS485	Yes
Wiegand	Yes
Installation	Wall-mounted
Tamper-proof	Yes
Processor	Quad-Core
RAM	2GB
Display	7-Inch LCD
Camera	2MP
Network	Ethernet
Integration	SIP, ONVIF
Light compensation	Yes
Ethernet	10/100M
PoE	802.3af
Operating Humidity	10% to 90% (non-condensing)
Storage	8GB
Protocols	SIP, ONVIF, RTSP