Name: Akuvox R29 Series
Brand: Akuvox
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Relay ID: R29 series supports three relays. Users can configure

them respectively.

Trigger Delay: To configure the duration of the trigger relay. With

the trigger condition, the relay will only be triggered if the value is

reached.

Hold Delay: To configure the duration of opened relay. Over the

value, the relay would be closed again.

DTMF Option: To select digit of DTMF code, R29 series supports

maximum 4 digits DTMF code.

DTMF: To configure 1 digit DTMF code for remote unlock

Multiple DTMF: To configure multiple digits DTMF code for remote

unlock.

Relay Status: While the relay is triggered, the statues will be

switched. When COM connects to NC, the status is Low.

Note: Relay operate a switch and does not deliver power, so users

should prepare power adapter for external devices which connects

to relay.

Figure 3.8.1 Relay

Other manuals for Akuvox R29 Series

Questions and Answers:

Need help?

Do you have a question about the Akuvox R29 Series and is the answer not in the manual?

General