Password: Configure if server needs a password to access,
otherwise left blank.
Common AES Key: Used for IP phone to decipher common Auto
Provisioning configuration file.
AES Key (MAC): Used for IP phone to decipher MAC-oriented
auto provisioning configuration file (for example, file name could be
0c1105888888.cfg if IP phone’s MAC address is 0c1105888888).
Note: AES is one of many encryption, it should be configured only
when configure file is ciphered with AES, otherwise left blank.
To display and configure Auto Provisioning mode settings.
This Auto Provisioning mode is actually self-explanatory.
For example, mode “Power on” means IP phone will go to do
Provisioning every time it powers on.
To display and configure DHCP setting for AutoP. Option 66/43 is
enable by default. It can support Https, Http, Ftp, Tftp server.
Figure 4.5.2-2 Automatic Autop
Figure 4.5.2-3 DHCP option