Alcatel-Lucent 7750 SR OS - Page 179

Interface Configuration
7750 SR OS Interface Configuration Guide Page 179
Services can be applied to the configured channelized ports. The following example shows the
CLI usage to configure a customer IES service with interface SAPs on the channelized ports.
Refer to the 7750 SR OS Services Guide for detailed information to configure services.
A:ALA-A>config>service# ies 104 customer 1 create
A:ALA-A>config>service>ies$ interface testA create
A:ALA-A>config>service>ies>if$ address 192.22.1.1/24
A:ALA-A>config>service>ies>if# sap 5/2/1.1.1.1.1 create
A:ALA-A>config>service>ies>if>sap$ exit
A:ALA-A>config>service>ies>if# no shutdown
A:ALA-A>config>service>ies>if# exit
A:ALA-A>config>service>ies# interface testB create
A:ALA-A>config>service>ies>if$ address 192.23.1.1/24
A:ALA-A>config>service>ies>if# sap 5/2/1.1.1.1.2 create
A:ALA-A>config>service>ies>if>sap$ exit
A:ALA-A>config>service>ies>if# no shutdown
A:ALA-A>config>service>ies>if# exit
A:ALA-A>config>service>ies# no shutdown
The following output displays the channelized ports 5/2/1.1.1.1.1 and 5/2/1.1.1.1.2) applied to
SAPs on the IES service configuration.
A:ALA-A>config>service>ies# info
----------------------------------------------
interface "testA" create
address 192.22.1.1/24
sap 5/2/1.1.1.1.1 create
exit
exit
interface "testB" create
address 192.23.1.1/24
sap 5/2/1.1.1.1.2 create
exit
exit
no shutdown
----------------------------------------------
A:ALA-A>config>service>ies#