Alcatel-Lucent 7750 SR OS - Table 23: Mda;Port Type Pairing for APS

Ports
Page 82 7750 SR OS Interface Configuration Guide
Supported APS MDA/Port Combinations
The following table displays examples of the port types that can be paired to provide APS
protection. Both ports must be the same type and must be configured at the same speed.
For example, an APS group can be comprised of a pair of ports where each port is on one of the
two following MDAs:
• m16-atmoc3-sfp
• m4-atmoc12/3-sfp (port in oc3 mode)
For example, an APS group can not be comprised of a pair of ports where one port is on an m16-
oc12/3-sfp and the other port is on an m1-choc12-as-sfp.
Table 23: MDA/Port Type Pairing for APS
MDA Type
Unchannelized
SONET/SDH
(POS)
For example:
m16-oc12/3-sfp
ATM
For example:
m4-atmoc12/3-
sfp
Circuit
Emulation
(CES)
For example:
m4-choc3-ces-
sfp
Channelized
Any Service
Any Port
(ASAP)
For example:
m1-choc12-as-
sfp
Unchannelized
SONET/SDH
(POS)
For example: m16-
oc12/3-sfp
Supported
ATM
For example: m4-
atmoc12/3-sfp
Supported
Circuit Emulation
(CES)
For example: m4-
choc3-ces-sfp
Supported
Channelized Any
Service Any Port
(ASAP)
For example: m1-
choc12-as-sfp
Supported