Alcatel-Lucent 7750 SR OS - Configuring DWDM Port Parameters

Configuring Ports
Page 190 7750 SR OS Interface Configuration Guide
Configuring DWDM Port Parameters
The following example displays a DWDM port configuration:
*A:ALA-A>config>port>dwdm># info
----------------------------------------------
channel 44
wavetracker
power-control
target-power -7.50
exit
encode key1 205 key2 749
exit
----------------------------------------------
*A:ALA-A>config>port>dwdm># info detail
----------------------------------------------
channel 44
wavetracker
power-control
target-power -7.50
exit
encode key1 205 key2 749
report-alarm enc-fail enc-degr pwr-fail pwr-degr pwr-high pwr-low
exit
rxdtv-adjust
----------------------------------------------
*A:ALA-A>config>port>dwdm># wavetracker
*A:ALA-A>config>port>dwdm>wavetracker># info
----------------------------------------------
power-control
target-power -7.50
exit
encode key1 205 key2 749
----------------------------------------------
*A:ALA-A>config>port>dwdm>wavetracker># info detail
----------------------------------------------
power-control
target-power -7.50
exit
encode key1 205 key2 749
report-alarm enc-fail enc-degr pwr-fail pwr-degr pwr-high pwr-low
----------------------------------------------