Alcatel-Lucent 7750 SR OS - Monitor Commands

Card, MDA, and Port Command Reference
Page 254 7750 SR OS Interface Configuration Guide
Monitor Commands
For more information about monitor commands, refer to the 7750 SR OS Basic System Configuration
Guide for command usage and CLI syntax.
Monitor
— port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate] [multiclass]
— port atm [interval seconds] [repeat repeat] [absolute | rate]
Clear Commands
clear
— card slot-number soft
— lag lag-id statistics
— mda mda-id [statistics]
— port port-id statistics
— port port-id statistics
— port port-id atm pvc [vpi[/vci]] statistics
— port port-id atm pvp [vpi] statistics
— port port-id atm pvt [vpi1.vpi2] statistics
— port port-id atm ilmi statistics
— port port-id atm interface-connection statistics
— port port-id queue-group queue-group-name [access | network] {ingress | egress}
[access|network]
[{statistics|associations}]
Debug Commands
debug
—atm
— cisco-hdlc port-id
— frame-relay
— lmi [port-id]
— [no] frf16 port-id
— lag [lag-id lag-id port port-id] [all]
— lag [lag-id lag-id port port-id] [sm] [pkt] [cfg] [red] [iom-upd] [port-state] [timers] [sel-logic] [mc]
[mc-pkt]
—no lag [lag-id lag-id]
— [no] ppp port-id
Tools Commands
tools
— dump
— aps aps-id [clear]
— aps mc-aps-signaling [clear]
— aps mc-aps-ppp [clear]
— eth-tunnel tunnel-index [clear]
— frame-relay port-id