Alcatel-Lucent 7750 SR OS - Configuring Frame Relay Parameters

Configuring Ports
Page 202 7750 SR OS Interface Configuration Guide
Configuring Frame Relay Parameters
Frame Relay pipes are used to provide customer-to-customer Frame Relay PVCs or to
interconnect individual Frame Relay clouds.
Frame Relay parameters can only be configured in SONET/SDH and channelized TDM MDA
contexts.
The following example displays a channelized interface configuration:
A:ALA-7>config>port# info detail
----------------------------------------------
description "DS3/E3"
...
tdm
buildout long
ds3 ds3
type t3
channelized
clock-source loop-timed
framing c-bit
no feac-loop-respond
no mdl
no mdl-transmit
no loopback
report-alarm ais los
no report-alarm oof rai looped
no shutdown
exit
ds1 ds1-1
shutdown
framing esf
no loopback
report-alarm ais los
no report-alarm oof rai looped
channel-group 1
description "DS3/E3"
mode access
encap-type frame-relay
no mtu
no mac
timeslots 1
speed 64
crc 16
frame-relay
lmi-type itu
mode dte
n393dce 4
n393dte 4
n391dte 6
n392dce 3
n392dte 3
t391dte 10
t392dce 15
exit