Alcatel-Lucent 7750 SR OS - Port Configuration Commands

Command Reference
7750 SR OS Interface Configuration Guide Page 229
Port Configuration Commands
config
—Port Configuration Commands
— port {port-id | bundle-id | bpgrp-id | aps-id}
—no port {bundle-id | bpgrp-id | aps-id}
— access
— egress
— [no] pool [name]
— resv-cbs percent-or-default
—no resv-cbs
— slope-policy name
—no slope-policy
— ingress
— [no] pool [name]
— resv-cbs percent-or-default
—no resv-cbs
— slope-policy name
—no slope-policy
— [no] ddm-events
— description long-description-string
— no description
— dwdm
— channel channel
— [no] rxdtv-adjust
— wavetracker
— encode
wave-key key2 wave-key
—no encode
— [no] power-control
— target-power dBm
— [no] report-alarm [encode-fail] [encode-degrade] [power-
fail] [power-degrade] [power-high] [power-low]
—ethernet
— xgig {lan | wan}
— hybrid-buffer-allocation
— ing-weight access access-weight network network-weight
—no ing-weight
— egr-weight access access-weight network network-weight
—no egr-weight
— modify-buffer-allocation-rate
— ing-percentage-of-rate rate-percentage
—no ing-percentage-of-rate
— egr-percentage-of-rate rate-percentage
—no egr-percentage-of-rate
— named-pool-mode
— egress
— named-pool-policy policy-name
—no named-pool-policy
— ingress
— named-pool-policy policy-name
—no named-pool-policy
— network
— egress
— [no] pool [name]
— resv-cbs percent-or-default